Metal Treatment-68

Monobasic sodium phosphate and sodium dihydrogen phosphate

Monosodium phosphate is a chemical composition that appeared in the form of solid crystals or white, odorless powder at room temperature. NaH2PO4 is the chemical formula of this salt and it is a combination of sodium and phosphorus.

MSP Mono Sodium Phosphate is used in various products, especially in the dental industry to repair teeth, prevent decay, or as a protector of tooth enamel. it is soluble in water but incompatible with ethanol and ether and creates heterogeneous mixtures with them.

Barium based chellating agent which effectively reduced and chellate Metal ion based on Advanced scale dissolver technology.

Acid Thickener  Rx is a nonionic surfactant designed to build viscosity in acid media. Acid Thickener  Rx surfactant may be used alone in hydrochloric acid, or in combination with sodium chloride (salt) when used with other acids (such as phosphoric, sulfuric, hydrofluoric, citric, oxalic, etc.) Varying the use level of Acid Thickener surfactant (and salt) will vary the viscosity build. Acid Thickener  Rx is a versitle, broad spectrum non phenolic biocide & Fungicide for leather, paper, paint, textile,wood and water treatment , free from penta - chlorophenate.

Corrosion Inhibitor is a low viscosity multi-purpose corrosion inhibitor and widely applicable and easily washable. It has strong effectiveness for ferrous and non ferrous metal.

Test Method

• Dipping, Sparying or Brushing
• Test

ASTM

DFT

Carbon Steel 101

Humidit

D-1748

2.5-3.5

500 hr+

Salt Spary

B-117

2.5-3.5

90 hr+

This is a multipurpose  product  specialy formulated to remove grime, dirt, and oily deposits from concrete, steel, and wooden decks. THis cleaner specialy formulated  to attack, penetrate and remove oil, dirt, dust, stains and organic deposits from large and small surface areas. It is an innovative, water soluble, biodegradable liquid product, pH buffered, formulated with strong wetting and cleaning agents. 

Ideal for deck and concrete preparation and maintenance

Aquasol Corrosion Inhibitor RX protect  components from corrosion during transport and storage . This environmentally-friendly product is a substitute for sodium nitrite-based alternatives. Aquasol corrosion inhibitor is added to rinse water for either spray or immersion rinse during cleaning, and provides long term protection against moisture and humidity for ferrous components. Protection may last up to six months, depending on storage conditions, and post-treatment processes such as brazing, bonding, and painting are not affected.

PRODUCT NAME:PHOSPHORIC  ACID

CAS number:7664-38-2

UN number:1805

Formula:H3PO4

Odour: 

Solubility in water:COMPLETE , ( 5.48 g/mL )

Density:1.834   at         OC

Boiling point:213  OC

Melting point:42  OC

Viscosity: 147 cP (100 %)

Flashpoint: 

Explosive limits: 

Vapour pressure:0 mbar at 20     OC

Skin absorption/irritation:YES

TLV       Country  NL                  Year  1995:ppm                 1          mg/m3

Pollution category  1994:D

Passiphos - 683 is a chromium free, inorganic, liquid chemical used in either immersion or spray final rinse, for zinc, manganese or iron phosphate coatings, to improve paint adhesion, and to minimize corrosion and blistering.

Drying:  Drying is recommended prior to painting with all types of paint except those applied by electro deposition. In electro painting processes, drying is optional if deionised water rinsing has been used and is recommended if deionised water rinsing has been omitted.

It is biodegradable, non-toxic, non-hazardous chelant passivation used for S.S. equipments & pipings specially for industries like Pharmaceutical, Dairy, Food, Beverages, Cosmetics etc.